o

Oldsmobile engine casting numbers

Oldsmobile engine casting numbers

How to read olds casting #s

I’m not sure what year or model this motor is, but I know it’s an Oldsmobile. The oil filler code is 1291091, and the block cast says 395558 2. Heads 7 front closer to core support, then between 1st and 2nd plug “CFD,” then top directly under valve cover “409,” and last 147. Any assistance will be greatly appreciated.
So the block’s filler is worng because the block says 395558-2 68-70 block and the filler says 1291091 which means it’s a 71 block or tube. So, does a 71 filler tube suit without causing any issues in the block? I have a second block with the same code as the first, 395558-2, and the filler tube says 9474371 with #5 heads. I’m still a little perplexed. Specifically, the filler tubes. Thank you once more.
Filler tubes are quickly replaced and should not be used to date and label the engine block. In reality, a large block filler tube can be used in a small block and vice versa; don’t rely on it solely for block identification. Use the number on the block as directed. Heads are often simple to replace. Due to the hardened valve inserts, it’s possible that someone installed a later head on the block. Don’t be worried about the filler tube’s compatibility with the engine. They’re all the same, and they’re all crammed into the same block. They’re simple to take out and replace. They can usually be removed by wrapping a rag around them and twist-pulling with wide channel locks. With a rubber mallet, pound them in. The 5 heads have a CID of 350 and a 64cc displacement of 68-69. Here’s the best engine details site I’ve come across so far: http://www.442.com/oldsfaq/oldsfaq.htm http://www.442.com/oldsfaq/oldsfaq.htm

Chevy engine block numbers location

I’ve got an olds 403. The casting number for the block in back of the water pump is 557265 4Bi, and it says 4A on my clyinder heads. I’ve looked at a few websites and am totally perplexed. Because of the 4A and 4B discrepancy, I’d like to know what year the engine is and whether the cylinder heads match the year of the block. I’m not familiar with the casting numbers for old engines. Thank you very much, boys!
Your casting number indicates a 77-79 block, and the head has a 4A stamp, which is correct for 77-79 403. I’m not positive, but I assume the 4a is the only head on the 403. By decoding the date codes, you can calculate the date of manufacture for the head and block, but your block and head combination is right for the 77-79 403.
SirLDragon’s quote from July 16, 2008, 01:09:26 The 4A heads are the only ones available for the 403. AMBob is right. They do not, however, have a date code. This can, however, help with the block. fantastic! Larry, thank you so much. – Rob is a man of many talents.
On the 403, where are the date codes? I haven’t been able to locate them. On chevys, they’re on the back of the block, just above where the transmission mounts, next to the casting number. On my 403, I can’t see anything back there.

Oldsmobile v8 engine information & casting numbers

From 1924 to 1928, this file lists all of the four-cylinder Chevrolet Cylinder Block and Head Casting Numbers in the United States and Canada, organized by year. Also included are serial and prefix Engine Numbers for 4-cylinder engines from 1924 to 1928.
From the beginning to 1984, this file includes a list of observed Cylinder Block Casting Numbers. This is not an exhaustive list, and it should be read in conjunction with other files. In certain instances, Canadian Blocks had different numbers from 1934.
Please see the above files for details on Canadian Engine Numbers up to 1937. Please contact DAVID HAYWARD immediately after that year, as we have a Canadian Chevrolet/GMC/Pontiac Database file covering serials, engine numbers, and casting numbers from 1915 to 1951 and beyond, and we might have the details on hand!

How to id your engine block

A 1980 Riviera with a 350ci “R” Gas engine is an example. Dr. 2 Get a copy of the vehicle’s history report. GM VIN Decoder for Free – Since 1980, you can get detailed details on any GM car. This fantastic tool decodes Vehicle Identification Numbers to provide you with useful knowledge about an Oldsmobile vehicle. I’m going to concentrate on Hurst/Olds VINs because this is a Hurst/Olds magazine. The Olds 455 was introduced in 1968, and it was based on the Olds 425, a tall-deck variant of the 330 engine… This will require a detailed vehicle report of six to ten pages. 1965-1972 OLDSMOBILE VIN DECODER There is a little cowl tag on under the hood sometimes (and I mention this because they DON’T always put them on). The VIN derivative is a nine-character stamp found near the #1 spark plug on the driver’s side of the engine block. Y ) h nx$103 u o Y ) h nx$103 u o Y ) h nx$103 Oldsmobile is a brand of automobile manufactured by General Motor 4 bbl ROCKET 455ci V8 Engine Vehicle VIN visible on side of block “G” Code Heads “W” Code Exhaust Manifolds Rochester Carburetor On the side of the case is a Turbo 400 automatic transmission with the vehicle’s VIN. Steering With Strength (Front) Brakes for Disks Organize a rallye R134 Conversion of Pac Gauge Kit, Power Windows, and Air Conditioning Since 1981, the VIN (Vehicle Identification Code) has been expressed as a 17-character serial number. These five characters, which are found in positions 4 through 8 of the VIN, can be used by the manufacturer to classify vehicle characteristics. ). Front-wheel drive. The engine balancer is a gigantic piece of equipment that is as scarce as hen’s teeth. PDF-1.4 percent